Coaxial linear grating structured light is also through the measured object reflected back to the grating and the geometric relationship between the reference grating, analysis of the height difference between each measured point and depth information, mainly with the line scanning camera use.

By the red, green, blue three colours according to the high school and low angle ring row, through different angles of light source irradiation, the product with a certain curved surface contour, presenting a better colour ring, defective products have a regular colour ring will produce deformation or irregularity.

For example, when the light source shines in a tiny round hole, because the hole is relatively small, when the light source passes through, a large part of the light has been dissipated, so that we can not see a clear image. Need to use Fennel lens to make the imaging light can penetrate the deep hole. Make the image clearly visible. Based on the market demand, in line with the real problem-solving service for customers, Chuangshi Automation has developed and designed the telecentric lens module for this kind of inspection problem. Telecentric mirror module is cheaper, the price is the absolute advantage. At the same time the effect is not bad, more convenient, easier to combine. Field of view adjustment is more simple and convenient.

This is a light source using a double lens design to distinguish the traditional coaxial parallel light, in order to ensure uniformity and brightness at the same time the size of the internal design of small corner light path, greatly saving the length of the space limitations in the direction of 120W lamp beads to meet the requirements of the brightness of the internal glass are all wrapped around the edge of the strip as a protective measure to reduce the risk of glass breakage of the light source to do hollowing out the lightweight treatment to reduce both the weight, but also aesthetically pleasing.

Strong direct light source, less scattered light, can make the light accurately irradiated to the tip of the needle, to avoid background interference, the use of high-power lamp beads, high brightness of the light source, fast detection speed

When the lamp beads emit light, there will be different directions of the light path, the cover with light-absorbing cloth absorbs the light in the direction of the evanescent light (yellow arrows), and we detect the degree of pin position, we need most of the light irradiated to the pins, as shown in the figure of the red arrows, so as to pull apart the contrast between the features and the background, and to reduce the interference of the background.

360 full-angle shadowless light source dome above the fill light source thickness is thin, can match a variety of specifications of the lens and the field of vision

The use of high-power lamp beads, arc type special uniform diffusion plate, water circulation cooling system, can ensure that the temperature of the light source shell is lower than 25 ° C, supporting the water circulation system can be used for power less than 150W light source use

This is a multi-spectral light source zoning light source, integrated red, green, blue, IR, UV and other visible and invisible wavelengths spectral, through the use of supporting digital controllers can be set up more than 16777216 spectral combinations, which can be applied to more different colours of the product requirements (can be customized according to the needs of integration of different wavelengths, such as UV/IR850 and other special wavelengths) and can be lighted according to the 4 zones, respectively. Can be used for photometric three-dimensional lighting programme or complex project lighting programme

This is a half-ring light source with LED as zero degree, plug-in LED distribution arrangement, each channel can be individually controlled when using, stable performance, easy to install, light source size and angle can be customised according to the actual situation.

Square shadowless light combination coaxial light, irradiation angle full, can be independently controlled angle, high and low angle light combination, enhance the surface characteristics, improve the contrast of defects

Since its establishment in 2015, Dongguan Chuangshi Automation Technology Co., Ltd (‘Chuangshi’) has been focusing on the research and development, production and sales of machine vision hardware and software. As a national high-tech enterprise, with years of industry accumulation and technology precipitation, Chuangshi has developed into a well-known machine vision solution provider in the field of automation optics.